CBAM default value for CN 7225 30 in every country
Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, i
The EU published its own default value for this code for 32 countries. Goods from any other country use the value for “other countries and territories”. Importers add a mark-up: 10% in 2026, 20% in 2027 and 30% from 2028.
Lowest: Azerbaijan
2.31
t CO2e per tonne, before mark-up
Other countries and territories
5.5
€371 per tonne for the buyer in 2026, at €82.32/t CO2
Highest: Indonesia
10
t CO2e per tonne, before mark-up
Every country, lowest value first
| Country of production | Default | 2026 incl. mark-up | vs other countries | Cost per tonne in 2026 at €82.32 |
|---|---|---|---|---|
| Azerbaijan | 2.31 | 2.541 | −58% | €176 |
| Taiwan | 2.364 | 2.6 | −57% | €87 |
| Serbia | 2.56 | 2.816 | −53% | €105 |
| Philippines | 2.65 | 2.915 | −52% | €207 |
| Chile | 2.85 | 3.135 | −48% | €131 |
| Iran | 3 | 3.3 | −45% | €145 |
| Uzbekistan | 3.26 | 3.586 | −41% | €262 |
| Argentina | 3.34 | 3.674 | −39% | €176 |
| Myanmar | 3.4 | 3.74 | −38% | €275 |
| Algeria | 3.41 | 3.751 | −38% | €182 |
| North Macedonia | 3.44 | 3.784 | −37% | €279 |
| Bosnia and Herzegovina | 3.46 | 3.806 | −37% | €187 |
| Vietnam | 3.48 | 3.828 | −37% | €189 |
| Japan | 3.5 | 3.85 | −36% | €190 |
| New Zealand | 3.52 | 3.872 | −36% | €192 |
| Thailand | 3.52 | 3.872 | −36% | €286 |
| Ukraine | 3.54 | 3.894 | −36% | €194 |
| Canada | 3.59 | 3.949 | −35% | €199 |
| United States | 3.59 | 3.949 | −35% | €199 |
| Australia | 3.61 | 3.971 | −34% | €200 |
| United Kingdom | 3.62 | 3.982 | −34% | €201 |
| Brazil | 3.65 | 4.015 | −34% | €204 |
| Mexico | 3.65 | 4.015 | −34% | €204 |
| Russia | 3.83 | 4.213 | −30% | €220 |
| South Korea | 4.03 | 4.433 | −27% | €238 |
| South Africa | 4.08 | 4.488 | −26% | €243 |
| Colombia | 4.18 | 4.598 | −24% | €252 |
| Kazakhstan | 5.34 | 5.874 | −3% | €357 |
| China | 6.11 | 6.721 | +11% | €427 |
| Türkiye | 6.45 | 7.095 | +17% | €457 |
| India | 7.32 | 8.052 | +33% | €536 |
| Indonesia | 10 | 11 | +82% | €779 |
| Other countries and territories | 5.5 | 6.05 | – | €371 |
Unknown country of production (Annex IV): 10 t CO2e/t. This value is meant for precursors whose origin is not known, not for the goods themselves.
The cost column deducts the free allocation (CBAM factor × the EU benchmark for the default value's production route), so two countries with the same default value can differ when their routes differ.
Use these values
- Cost calculator: your buyer's yearly cost for your tonnage and country, to 2034.
- Is HS 7225 covered by CBAM?: every code under the heading, today and in the 2028 proposal.
- Sourcing comparison: the same comparison for the steel and aluminium you buy in.
- Data feed: every value as JSON or CSV.
Default values: Implementing Regulation (EU) 2025/2621 Annex I/IV as corrected by (EU) 2026/1740 (Commission file v2, 6 Aug 2026). Benchmarks: Implementing Regulation (EU) 2025/2620, Annex section 5, Column B, every production route (Commission file v1, 6 Feb 2025). Indicative only, not legal or customs advice. See the disclaimer.